The Lube Launcher is an exciting new addition to the Hismith line that allows you to automatically ejaculate lube from a reservoir at the touch of a button to a dildo equipped with a suitable tube (often called a “cum tube”).

Supplied with an adaptor to attach it to the leg of our Premium fucking machines, the Lube Launcher can be controlled via a single button press on the device, or during Solo mode play in the Hismith app (with or without a fucking machine connected).

How to Use the Lube Launcher?

Simply unscrew the cap, fill up the tank with your favourite lube, and replace the cap. The filling cap is located on the base of the device, so be sure to turn it over again before use—the button should be on top. Hold down the button to turn it on, and press once to ejaculate! You can use all sorts of water-based lubricants, though the thicker the liquid, the less far it will be able to shoot. For a more dramatic effect, simply add a little water and shake

It takes a few presses to fill the attached tube initially, but make sure you keep the tube clean to prevet blockages.

The Lube Launcher charges over USB-C, so there’s no additional cabling to worry about.

Why Use a Lube Launcher?

The biggest reason to use our Lube Launcher is being able to re-apply lubrication while using a fucking machine. Water-based lubes get absorbed quickly, and the mechanical action of a fucking machine means you need plenty of lubrication to get the smoothest experience. Normally, that would mean pausing your session, pulling out the dildo, and re-applying some lube. But with the Hismith Automatic Lube Launcher, just press the button or use the app, and carry on going without interrupting the scene.

The second reason to use the Lube Launcher is for a little realism or dramatic effect. We have a huge range of lifelike ejaculating dildos for the ultimate in realistic cock feeling, but actually getting one to ejaculate usually means tediously pressing down a plunger or squeezing a bulb. Now you can simulate ejaculation on demand with the press of a button! It’s perfect to enhance your femdom pegging session, and for content creators to add creativity to their scenes.

How to Clean the Lube Launcher?

The easiest way to clean the lube launcher is to refill it with water and give it a shake. Then, use the button to eject all the liquid. You should repeat the process at least twice, leaving the dildo attached each time to ensure the tube and Lube Launcher are fully flushed out. Then disconnect the dildo and proceed to clean that in your preferred way (a little soap and warm water is usually enough).